HexiBox Series: Trihexa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A miniature subwoofer based on the Tang Band W3-1876S driver.
- Rating
- 5 / 5
- Likes
- 142
- Downloads
- 749
- Makes
- 5
- Views
- 6,696
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
As seen on X and YouTube:
Designed for use with three Tang Band W3-1876S 3" subwoofers. Suitable for corner-loaded output between 30-100Hz.
Tang Band W3-1876S 3" Subwoofer:
https://www.parts-express.com/--264-909
Hilitchi Binding Posts Terminals
https://www.amazon.com/gp/product/B07PFMD1N2/
M4 x D6 x L6 Threaded Inserts:
https://a.co/d/0w8jzpp
M4 Screws:
https://a.co/d/1DX5BYc
Subs wire in parallel.
Recommended printing settings:
PLA is okay; PETG is better.
At least 4 walls (perimeters) all the way around.
At least 50% gyroid infill. (Higher is better.)
Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.