ESA Dust Cap / ESA Lungenautomat Kappe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cap for most DIN 58600 compliant air regulators
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
English version:
This is a protective cap for respiratory lung regulators. The cap should be compatible with all common lung regulators with a universal plug connection (ESA). The maximum depth for the protruding part of the regulator is 20 mm, measured from the beginning of the conical section. The cap was tested on a Dräger PSS lung regulator.
It is recommended to print the part with the flange facing the bed, as no support will be needed then.
----------------
Deutsche version:
Dies ist eine Schutzkappe für Atemschutz-Lungenautomaten. Die Kappe sollte mit allen gängigen Lungenautomaten mit Einheitssteckverschluss (ESA) kompatibel sein. Die maximale Tiefe für das herausragende Stück des Automaten beträgt 20 mm, gemessen vom Beginn des kegelförmigen Abschnitts. Die Kappe wurde an einem Dräger PSS-Lungenautomaten getestet.
Das Teil sollte am besten mit dem Flansch in Richtung Bett gedruckt werden, da dann kein Support benötigt wird.