1 / 4
ESA Dust Cap / ESA Lungenautomat Kappe — image 1
1 / 4

ESA Dust Cap / ESA Lungenautomat Kappe

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dust cap for most DIN 58600 compliant air regulators

Rating
0 / 5
Likes
1
Downloads
26
Makes
0
Views
223
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

English version:

This is a protective cap for respiratory lung regulators. The cap should be compatible with all common lung regulators with a universal plug connection (ESA). The maximum depth for the protruding part of the regulator is 20 mm, measured from the beginning of the conical section. The cap was tested on a Dräger PSS lung regulator.

It is recommended to print the part with the flange facing the bed, as no support will be needed then.

----------------
 

Deutsche version:

Dies ist eine Schutzkappe für Atemschutz-Lungenautomaten. Die Kappe sollte mit allen gängigen Lungenautomaten mit Einheitssteckverschluss (ESA) kompatibel sein. Die maximale Tiefe für das herausragende Stück des Automaten beträgt 20 mm, gemessen vom Beginn des kegelförmigen Abschnitts. Die Kappe wurde an einem Dräger PSS-Lungenautomaten getestet.

Das Teil sollte am besten mit dem Flansch in Richtung Bett gedruckt werden, da dann kein Support benötigt wird.

Tags