Science Olympiad Material Science 2025 Molds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This set of models is for Science Olympiad Material Science C 2025
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Summary
This set of models is for the Science Olympiad Material Science C 2025. The lab portion of the event requires teams to make concrete pucks of certain dimensions. The dimensions of these models comply with 2025 rules, the diameter is 40 mm.
Note
Please confirm which ruleset the event you are participating in is using. There are three different thicknesses: regional 15 mm, state 10 mm, and national 5 mm.
Printing
Layer Height: 0.2mm
Supports: None
Infill: Cubic 15%
Filament Material: PLA
Usage
Put the molds on a flat surface (such as a wood board), pour the concrete mixture into the circles of the molds, put another piece of wood board on the top, and wait until the pucks are dried completely.