1 / 1

Science Olympiad Material Science 2025 Molds

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eric Zhang

@EricZhang_2599605

This set of models is for Science Olympiad Material Science C 2025

Rating: 0 / 5
Likes: 3
Downloads: 14
Makes: 0
Views: 123
Reviews: 0

Updated at source: Feb 12, 2025

Model information

Source: Printables
Category: Engineering
License: Creative Commons — Attribution

Details Files (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (3)

Summary

This set of models is for the Science Olympiad Material Science C 2025. The lab portion of the event requires teams to make concrete pucks of certain dimensions. The dimensions of these models comply with 2025 rules, the diameter is 40 mm.

Note

Please confirm which ruleset the event you are participating in is using. There are three different thicknesses: regional 15 mm, state 10 mm, and national 5 mm.

Printing

Layer Height: 0.2mm

Supports: None

Infill: Cubic 15%

Filament Material: PLA

Usage

Put the molds on a flat surface (such as a wood board), pour the concrete mixture into the circles of the molds, put another piece of wood board on the top, and wait until the pucks are dried completely.