IKEA Skydrag Wall Mount with Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an 80cm Skydrag LED Strip in a way that optimally lights a working surface at the wall. With optional shade.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Mount an 80cm Skydrag LED Strip in a way that optimally lights a working surface at the wall:
Assumes the distance between working surface and light is the same as the depth of the working surface. In the above picture, the LED strip is fully visible in the bottom three triangles, partially visible in the top triangle, and not directly visible above the top triangle. The line separating the bottom triangles hits the working surface in the middle and represents the angle of the LED strip and thus the axis of maximum brightness.
Using the shade is optional, but recommended to prevent a direct line of sight into the LED strip. Below, the left mount is without shade and the right one with:
Print settings (see pre-sliced 3mf files):
- Prusament PLA Pristine White
- 0.1 FAST DETAIL for the mounts and 0.28 DRAFT for the shade elements.
- 0% infill for the shades.
- “Support on build plate only” for the mounts and “Brim” for the shades:
