K1/K1C exhauster lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a model of modified stock lid
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I print ABS/ASA a lot, so I'd like to have my K1C more hermetic. Stock carbon filter is just useless.
There are many filter cases models out there, but I do not want to replace filters and refill carbon every other day. So, I decided just to make a closed lid for exhausting fan.
If you want it to smell less and have higher temperature inside:
- Just use a temp-resistant tape on stock lid. The most quick and cheap solution.
2. You may print closed model. Advantages - no tape, heat-resistant, the color of your choice
3. You may print my model with nice holes for ventilation. The color and infill pattern are of your choice. 10-12 perimeters, 0 top layers, 0 bottom layers, infill 15%, sparse infill line width 0.7
