Lenovo Thinkcentre M920 10 Inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specific build of my parametric rack for the Lenovo M920 Tiny.
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 803
- Wydruki
- 4
- Wyświetlenia
- 7241
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Print settings:
- 0.2mm layer height
- 4+ bottom layers and 5+ top layers
- 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle
- 10+% infill
- I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the latch durability with PLA yet.
Specific build of my parametric rack to work with the Lenovo M920 Tiny. Sized for a 179mm x 37mm x 183 mm (WxHxD) box, which fits my M920q perfectly. Many other Lenovo Thinkcentre models should fit. It looks like it should work for the M700/M900, M710/M910, and M720/M920 series of tiny Thinkcentre desktops at a minimum.
Note: Lenovo often lists the height without the rubber feet, which is only 34.5mm. This model assumes your rubber feet are still in place. If not the model will still work, there will just be a gap above the PC.