41 modeli
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
Description This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back…
This is a simple bracket inspired from various other to fit a dual nic card into a m920q. I printed it in PLA.
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
Use tin Snips to cut out the top of the lid and glue the overhang. I found a significant drop in CPU/GPU temp with the lid off vs on, having this vent should get the required result. The version you need for the Lenovo Mini is: 155x140
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
Adjusted with PrusaSlicer, so it may not be pretty, but it just works. -You may need to hold the right side down as you screw in to prevent the print from twisting. -The right screw threads into the print. Refrain from over threading.…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
Lenovo ThinkCentre M920q / M920x / M720q — Vented Extended Cover with 120mm Fan Drop-in replacement for the standard side cover, adding a full-length single-slot PCIe card slot (up to 175mm) and a 120mm top-mounted cooling fan. Designed…
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. You'll need some supports for the Mini DisplayPort cutouts if you don't use the included 3mf…
2.5GbE M.2 A+E Key NIC Bracket for Lenovo Tiny M720q / M920q / M920x A simple mounting bracket that lets you add a 2.5GbE network card to your Lenovo Tiny (M720q, M920q, M920x series) using the M.2 A+E key slot normally occupied by the…
I didn't like the slightly unaligned baffle of darken, so i created my own. The baffle fits a SAS9207-8E HBA and 2,5gbe adapter. I cut the part above the wifiantenna hole to make a better fit. I use the antenna hole to guide the power…
Adapted bracket make the broadcom 57810 to work in a Lenovo M920q. Keep in mind that other modifications needs to be done in order to make the card to work in that tiny pc like : -Buy the appropriate pci expansion card Pcie4 expansion…
This is a remix of the “Lenovo ThinkCentre Tiny M920q 19-inch rack mount” by Mixmeister on Printables (model #1417569). The original design holds two Tiny systems side‑by‑side in 1U; this remix replaces the left slot with a front-panel…
This is a blank for use with the " Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch Rack Mount" from @Mixmeister (a remix of a model from @timmi) - total credit to the creators. This is a removable blank that fits into the space where a…
Lenovo M920q 1U rack mount adapter. This is for 1/2 of a 19" rack mount 1U.
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…
Basic simple no support required plate for fastening a 2.5g dual RTL8125B network card into a Lenovo M920Q machine. Is also compatible with M720 machines. Uses all stock screws and is best produced using PETG filament. Please like and…
10GTek X520-DA1 bracket for Lenovo M720Q / M920Q (pcie riser needed), 3,5mm notch added for usb cable of 4010 blower fan if needed.
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. This is the second version of the mount with better airflow and no supports needed. I've…
Rear panel adapter to fit 2.5G + 4x sata card in M920q Fits M3x5.7 heat inserts from CNC Kitchen in holes. 2.5G + 4 sata can be found here…
Rear plate adapter for Startech PEX10GSFP for fitting in M920q. M3x5.7mm heat inserts from CNC Kitchen fit in holes. https://www.startech.com/en-us/networking-io/pex10gsfp
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
This 3D model file offers a customized top cover and front bezel designed specifically for the Lenovo M920q to accommodate the MSI RTX 3050 LP 6G graphics card. The top cover has been extended by 10mm to ensure a perfect fit for the GPU,…
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…
