1 / 5
Lenovo Mini PC 10" 1U Mount. (M710q, M720q, M920q, M93p) — zdjęcie 1
1 / 5

Lenovo Mini PC 10" 1U Mount. (M710q, M720q, M920q, M93p)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 10" rack mount for a Lenovo tiny PC. Tested and confirms to work with M720q, M710q, M920q, M93p.

Ocena
5 / 5
Polubienia
30
Pobrania
224
Wydruki
0
Wyświetlenia
1256
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Description

This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back of the mini PC and then grab the front.

Printing took me about 8 hours on my MK2.5s with 15% infill. The print used about 110g of filament. 

While there is no rear support, the sagging was minimal. Defiantly a slight sag at the very back but nothing that's out of the usual. If any problems arise I will post an update. 

Supported Lenovo Models

I have designed the mount to fit a couple different mini PCs as I have a couple. The mini PCs are very similar except the bottom feet.  

Tested and Confirmed:  

  • M720q
  • M93p

Suspected to work based on physical dimensions: 

  • M710q
  • M910q
  • M920q

If you have any models not listed here and you print this design please post a make or leave a comment and I will update the list. 


 

 

Tagi