Lenovo Mini PC 10" 1U Mount. (M710q, M720q, M920q, M93p)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 10" rack mount for a Lenovo tiny PC. Tested and confirms to work with M720q, M710q, M920q, M93p.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 224
- Makes
- 0
- Views
- 1,256
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Description
This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back of the mini PC and then grab the front.
Printing took me about 8 hours on my MK2.5s with 15% infill. The print used about 110g of filament.
While there is no rear support, the sagging was minimal. Defiantly a slight sag at the very back but nothing that's out of the usual. If any problems arise I will post an update.
Supported Lenovo Models
I have designed the mount to fit a couple different mini PCs as I have a couple. The mini PCs are very similar except the bottom feet.
Tested and Confirmed:
- M720q
- M93p
Suspected to work based on physical dimensions:
- M710q
- M910q
- M920q
If you have any models not listed here and you print this design please post a make or leave a comment and I will update the list.