DRAWER HANDLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for organizing the drawers of your lab/garage/workshop and any other place you want
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
DRAWER HANDLES with LABEL MOVIBLE
Useful for organizing the drawers of your lab/garage/workshop and any other place you want.
The handle has a label/plate that can be moved if necessary, so you don't have to move the entire handle or the adhesive label itself.
You can move the labels infinitely until you reach the optimal configuration. Good setup :)
POSSIBLE USE:
TOP DRAWER HANDLES (available sizes from 10 to 30 mm of drawer thickness,visible on the print plate name)
CENTER DRAWER HANDLES (one size)
For printing I used PLA, directing the handles with the part where the label is inserted so as to have a surface as smooth as possible in that point.
Don't worry if the first interlocking of the pin seems too strong, but I did several tests and after a few insertions the interlocking will soften by itself.
All handles have a centralizing point to facilitate assembly, it will be useful to see how I did it in this video.