1 / 4
Environment Monitor Housing - Case for Freenove ESP32WROOM, Sensair S88, Adafruit SHT-31, 0.96 OLED
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifying the work of the original and remix posters to accommodate different ESP32, sensors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
As with the original remix, the case is split into 3 parts for easier printing and assembling.
8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides.
Note: according to the handling manual for the S88, the following apply. Disregard the below at your own risk:
- OBA shall not be subjected to any force
- No gluing or molding on OBA
- Minimum of 1mm rear to fixed mount, 1.5mm minimum distance from particle filter to cover/PCB
- Minimum of 1mm edges to housing/cover/PCB
Given the above, my implementation floats both sensors via the power and data wires glued to the support structures; not suitable to high temperature/vibrational environments.