1 / 4
Environment Monitor Housing - Case for Freenove ESP32WROOM, Sensair S88, Adafruit SHT-31, 0.96 OLED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modifying the work of the original and remix posters to accommodate different ESP32, sensors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
As with the original remix, the case is split into 3 parts for easier printing and assembling.
8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides.
Note: according to the handling manual for the S88, the following apply. Disregard the below at your own risk:
- OBA shall not be subjected to any force
- No gluing or molding on OBA
- Minimum of 1mm rear to fixed mount, 1.5mm minimum distance from particle filter to cover/PCB
- Minimum of 1mm edges to housing/cover/PCB
Given the above, my implementation floats both sensors via the power and data wires glued to the support structures; not suitable to high temperature/vibrational environments.