Counting matching models…
ESP32 4.0 inch IPS LCD Touch Freenove Case This case has been designed to fit the Freenove ESP32 Display FNK0103 4.0 inch 320x480 ST7796 touch screen. It's very similar to the smaller CYD display (2.8inch) It's a nice 320 x 240 TFT screen…
This case is designed around the following: Freenove FKN0078 7" Touchscreen Raspberry Pi 4 Model B Geekworm P165-B 11mm heatsink for the Raspberry Pi 4 Model B Assembly requires the following hardware 4x M2.5 x 15mm screws 4x M2.5 x 10mm…
Case and camera clip for the Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM The separately printable clip, which clips over the processor board, can be used to adjust the angle of the camera.
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
A remix of the case and the lid. Bigger USB C hole Add air tunnel for better cooling (back of the board) Add air slot for better cooling Air (sides) Add better finish on the lid's top. Less material used. Need Support for the case.
Bought the cheapest Raspberry Pi 5" display on Amazon and then realized that no other 3D model support this model, so I had to make my own. The case features a slim design, brightness button and ribbon cable cutouts and a mounting system…
Box for a Freenove ESP32 board with cam. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20 Category: 3D Printing
Bigger with 2 usbc places and moved the buttons. I also added some blockers in the openng stopping water from getting in this I think for the latest cheapest esp32-s3wroom-1 availible on ali express. ESP32-s3-wroom-1 It has an opening for…
This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…
This is a simple adjustable, tilting design for mounting the 5" DSI Touch Screen by Freenove to any 3D Printer frame and allowing you to use KlipperScreen. This is not a snap-together design - I wanted it to feel good quality and not be…
A Displaymount for a Freenove 5" DSI Display for Voron 2.4 or Trident.
Notes This does not include rotation, so if you want full control of the camera angle you will need to print at least one 90º turn or twist from Michal's set. I recommend Gopro_Like_Joint_Turn_90.stl My print settings PETG 0.2mm layer…
The Freenove Hexapod Robot Kit is an excellent value hexapod kit that can be controlled from PC or phone or a supplied rf controller. It is available from ebay or amazon or aliexpress. Here's the Amazon UK link…
Case for Freenove's 7 in display including holes for ventilation, power, usb, ethernet, pins and ventilation. I tested it with my Raspberry pi 5 and it works great. Some minor changes might be needed for a Raspberry pi 3 or 4. Note : 4…
The mouth is an 8 x 16 I2C led matrix sourced directly from freenove (it is the one they use in their ant robot among others), order from [email protected] There is something similar on the Otto DIY website…
As with the original remix, the case is split into 3 parts for easier printing and assembling. 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides. Note: according to the handling…
Mounting bracket Freenove ESP32-S3 WROOM CAM for PRUSA XL on PRUSA XL Enclosure Software for camera: https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam/blob/master/doc/Freenove%20ESP32-S3-Wroom/README.md#flash_fw flashed under Linux with…
Simple base/stand for Freenove Breakout Board designed to keep the PCB stable and protected during use. Provides a clean and minimal solution for everyday electronics projects and prototyping. Compatible board:…
This model is my first 3d modeling project and im somewhat happy with it. this model allows you to mount an lcd touch screen to your printer. if the screen you are using allows for you to mount an sbc to the back of the screen, this mount…
Bottom frame for Freenove/Arduino 4WD Car
Top Frame for Elegoo/Freenove 4WD Car
Easy to use and fast start with Prototyps. need 4x M3x8mm bolts Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4 Resolution: 0.16 ( because of small snap joints) Infill: 15-20%
A Din Rail mount for a Raspberry Pi Pico Freenove screw mount terminal board. The mounting holes under the breakout board are spaced for Adafruit qwiic breakout boards. You will need to print one tab for this design. It can be found at…
Can be printed with or without text. Can be printed as one part - or two parts connected with screws. This allows placement on smaller bed sizes. Full colour lettering supported. If printed in two parts, join either using m3 nuts/bolts,…
A din rail mount for a Raspberry Pico freenove screw terminal board. This board is set up to use m2.5 screws and/or heatset mounts. The link to Amazon: https://a.co/d/bzdLP4E Category: Electronics
This design is based on the rough layout of xkirdx design but since the Freenove PCB has a different size and USB layout the original enclosure doesn't fit and I redesigned it. The USB-C cable that comes shipped with the Freenove ESP32…
Remix of two different models adding breathing hex holes, and using the XL mounting hex. Larger dual USB hole to accommodate the cable that ships with these units. Holes for mounting the temp sensor, 15 & 30 degree tilt mounting option,…
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/19FgHapH8oc Work in progress the platform will be modified and a branch for PI \ ARDUINO mounts as ir progresses Category: 3D Printing
LOOK AT THE TITLE
This is a mounting bracket for the arm that also relocates the camera to the back of the car. I built it for the Raspberry Pi-controlled Freenove 4WD Smart Car. More details are available on GitHub . Category: Robotics
Remix of two different models adding breathing hex holes, and using the XL mounting hex. Larger USB hole to accommodate the cable that ships with these units. Mounts the Freenove ESP32 CAM to an XL. all you need is a M3x(20-25mm) screw.…
Case for Freenove's 7 in display including holes for ventilation, power, usb, ethernet, pins and ventilation. I tested it with my Raspberry pi 5 and it works great. Some minor changes might be needed for a Raspberry pi 3 or 4. Note : 4…
A Displaymount for a Freenove 5" DSI Display for Voron 2.4 or Trident.
NOTES The mount is made to be used with the Ender 3 Max ( 2021 ) but should work with any Ender 3 printers with the 4040 profile rails. The case is made for use with the Raspberry Pi 3 Model B and FREENOVE 5 Inch Touchscreen ( FNK0078A) .…
This is a simple protective base for your Freenove ESP32-S3 Breakout Board v1.1: Protect the exposed pins from stray metal objects on the workbench that could let out the magic smoke Protect your table surface from scratches caused by…
A housing for the Freenove ESP32-S3-WROOM CAM I bought on aliexpress to monitor one of my printers. Uses M5 bolts and nuts, plus M4 hardware for the T-nuts for attaching to 3D printer extrusions. Use a zip tie to put the case together xD
I remixed the RASPBERRY_BOX_2.stl to support 30mm fans
ESP32 Freenove Breakout V5 Caddy Tray This caddy/tray has been designed to protect the Freenove Breakout V5 board. The board is fixed to the caddy with 4x M3x5 screws. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive…
Freenove Connect V5 Caddy Tray This caddy/tray has been designed to protect the Freenove Connect V5 board. The board is fixed to the caddy with 4x M3x4 screws. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive feet…
Freenove Connect V5 Slimline Case This case has been designed for the Freenove Connect V5 board. (or the UNO R4) The cover clips into place without the need for screws The board is fixed to the base with 4x M3x4 screws. Printed on 0.2mm…
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/0QoDSBWj7KH Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/543lX4sRD5A Need to update but if you print this the mounting holes need to be slightly bigger and update is pending Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/543lX4sRD5A Need to update but if you print this the mounting holes need to be slightly bigger and update is pending Category: 3D Printing
You will need to assemble: 8 m3 inserts 4 m3x12 screw 4 m3x20 screw 4 m4x15 screw (for support) 4 m4 T-nut Enjoy it!!
My sons were given a freenove starter kit as a joint present. I made this simple mount to house the resistors, the arduino board and the breadboard. It all fits however some usb cables dont fit in the hole and may need a light…
A simple remix from the case made by @dontapi_1101289 for the neptune 3 pro. I removed the part that block the insert. It should also work on other neptune series printer I think. Have a nice day.
Little case for the Freenove control boardV5 Wi-Fi and led's “FNK0096 A A1B0” with a reset button. It's a tight fit but it dose all fit (just). Used Sunlu PLA, 3mm drill, file, sanding block and some super glue. Transparent Orange PLA+…
