OpenDTU Freenove ESP32-S3 Lite NRF24L01 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Freenove ESP32-S3 Lite, NRF24L01+ with PCB antenna and SSD1306 0.96" OLED display
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is based on the rough layout of xkirdx design but since the Freenove PCB has a different size and USB layout the original enclosure doesn't fit and I redesigned it.
The USB-C cable that comes shipped with the Freenove ESP32 fits into the enclosure cutout, other cables with larger connector sizes may not fit.
Changelog
2026-04-11: Uploaded first public R5 revision.
Additional hardware you need
Freenove ESP32-S3 WROOM Lite
NRF24L01+ module with PCB antenna
Optional: Display SSD1306 0.96" OLED, mount hole diameter 2.8mm, horizontal distance 20.5mm, vertical distance 23mm
Optional: 2x 5mm diameter LEDs + matching resistors, I used a green and an orange LED and 2x 68 Ohm resistors
Optional: 10uF capacitor on the 3V3 rail
Optional: Grid PCB in the size of the ESP and two sockets for the ESP to be plugged into
1x M3x10mm or longer screw to secure the base and cover
1x M3 heatset insert
Optional: 2x M2x3-4mm screw to secure the display, or a bit of glue
Dimensions
Length: 75mm
Width: 56mm
Height: 45mm
I left enough space inside the enclosure to use the ESP with pins/socket and another PCB for soldering.
Printing
Material: PETG (Prusament PETG Ocean Blue)
Nozzle: 0.4mm
Layer Height: 0.2mm
Perimeters: 2
I added local modifiers for the main M3 screw mount to add 4 perimeters
Infill: 15% Gyroid
Supports: Enable automatic tree support
Orientation: Print the cover upside down