Counting matching models…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
ASSEMBLY MANUAL IS HERE I designed this in a single evening. Do with that information as you will. HTLF is a lane-based filament changer for Klipper designed by ArmoredTurtle. It uses a camshaft to engage the selected lane, effectively…
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
This is a 3D printed Case for the OpenDTU Breakoutboard by blinkyparts.com: https://shop.blinkyparts.com/en/OpenDTU-Breakoutboard-Your-evaluation-for-your-balcony-solar-system/blink237542 The OpenDTU breakout board can be used to read out…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.
Thanks to cooasty for the beautiful pinwheel. The two propellers are counter-rotating and have a nice "hypnotic" effect due to their shape. After cooasty's windmill had survived a few years and storms, I wanted to build the windmill…
Case with snap on lid for OpenDTU with 0.96 OLED Display. https://github.com/tbnobody/OpenDTU This case is based on Case for OpenDTU Breakout Board by bjoerns1983 Hardware i used for this: ESP32 NodeMCU with CP2102 NRF24L01+ with…
Thank you airfish for the beautiful counter-rotating illusion wind turbines. I couldn't find the original pinwheel anywhere anymore... I enlarged the wind turbines to 200 mm and added hubs for ball bearings 608ZZ (22x8x7). There are 4…
Ein Haken zum einklicken in einen Handtuch-Trockner-Heizkörper Original.stl: 25.11.2020 Durchmesser der Rohre: 23 mm, Abstand der Rohre 22 mm Damit fällt das gefuzzle beim einfädeln der Handtücher weg. Einfach an den Haken hängen und es…
A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…
A very simple and minimalist holder for your guest towels in the bathroom. The design can be printed on any printer without any problems, even on mini printers with a very small installation space. The holder consists of several parts…
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
https://ahoydtu.de/ Dimensions: 58 mm x 49 mm x 36,2 mm V1: Solid Housing / V2: Housing with mounting holes / V3: Housing with extra wall mount V4: Dimension 68 mm x 49 mm x 37,8 mm / model for D1 Mini ESP8266 + NRF24L01 and Adapter for…
Shower Towel Hook Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Available for 6, 8 and 10mm thick glass walls and doors. Have fun! Duschwand Handtuch Hacken…
Thanks to LegoRJ35 and strikingfpv for the toroidal propellers. Made it into pinwheels with 200 and 250 mm diameter and a hub for 608ZZ (22x8x7) ball bearings with a nice illusion effect. There are 12 different wind turbines with 3x, 4x…
These jigs can be used to set a miter saw or a wedgie sled to the exact degree/angle for cutting segments of wood that then can be glued up to make rings for gluing a bowl blank that can be turned on a lathe. Currently included in the…
Another case to give your pcb from the Discord-Server of https://ahoydtu.de a home. This version is for the longer NRF antenna which protrudes slightly above the board. The USB connector sits a little deeper due to the longer housing.The…
Towel Holder for the kitchen. It fits one towel. - Handtuchhalter für die Küche. Passend für ein Handtuch.
Schlüsselbrett Handtuchhalter Haken
Habe hier ein Gehäuse für eine OpenDTU konstruiert mit einem 2,42zoll Display. Das Gehäuse selbst hält ohne Schrauben zusammen es wird geklickt. Es gibt 3 Varianten von dem Gehäuse, für zwei oder eine Antenne. Kommt auf euer ESP32 drauf…
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
This hanger will clamp to the heater and stick. Use the f3d file to adjust all parameter according to your needs. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: No Resolution: 0,02 Infill: 10%…
Below, translated into English by DeepL Gehäuse für die Ahoy DTU /Open DTU mit Waveshare 1.54 Inch E-Paper Display und Externer Antenne Die Ahoy-DTU / Open-DTU ist geeignet, um die Hoymiles PV Wechselrichter der HM Serie mit dem WLAN zu…
This case I build for my OpenDTU Fusion PCB. With the big display you could see the actual production of your solar system. The display is secured with the 2 bars that are clamped into the housing behind the display. You could print it…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Danke an das super Design von @Gnorzkopf. Für einen ESP32 habe ich die Breite der Schienen etwas erweitert und das Gehäuse verlängert. Die Rückwand passt problemlos. Zum Drucken habe ich das Gehäuse auf die Front gelegt und organische…
Kleines Gehäuse passend für ein ESP32 Dev Board und eine NRF24L01+ Antenne, wenn diese per Dupont-Kabeln miteinander verbunden sind. Der Deckel ist steckbar, hält jedoch trotzdem sehr gut. Das Gehäuse gibt es mit 2 verschiedenen…
Badezimmer Handtuchhaken. Für Rohrdurchmesser 22,5 mm.
Thanks again to Lukass for the great Archimedes wind turbine. For my second remix, I used the original size of the Archimedes spiral and created a new frame with ball bearings and five different sets of tails. It turns even with barely…
Haken für Handtuch oder Badetuch
Der Haken ist für Küchenfronten bis 16,5mm stärke. Zum oberen Schrank/Schublade müssen mindestens 3,5mm Platz zwischen den Fronten sein. The thickness of your kitchen front has to be max. 16,5mm or aprox 0,65 inches and need a clearence…
Simple Hooks for Towel Radiators in your Bathroom. They fit on radiators with 21mm tubes. I added the Fusion360 as it is a nice beginner sketch to learn remixing. PETG is preferred due to better heat stability. It's super easy to print .…
Thanks again to rosch8 for the beautiful original wind turbine. I recommend printing the successor, the MK3. The bearings on the MK2 wind turbine are difficult to install without causing binding, and temperature fluctuations can also lead…
This is a jig and gauge to woodturn a star. Jig threads fit 1"x8tpi. If your spindle varies, I recommend purchasing adapters rather than attempting to model new threads. For the jig, recommend at least 3 perimeters and 50% infill at .2…
Gehäuse für ESP32 Microkontroller und Funkmodul. Zum Verwirklichen einer Ahoy-DTU aber auch anderer Projekte. Ich habe für mein Projekt folgende Teile verwendet: Espressif ESP32 WLAN Dev Kit Board Development Bluetooth Wifi v1 WROOM32…
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
Case for use with pcb from the Discord-Server of https://ahoydtu.de Lid with or without OLED Display. For use with Ebyte E01-ML01DP5 The case is not perfect but for me it fits. Added Case with USB, Case with USB and DC-Opening, and Cases…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Für Heizkörpermodelle mit runden Stäben und Stabdurchmesser 22mm und Stababstand (Mitte-Mitte) 42mm
Additional parts needed: 2x miniature ball bearing 8mm x 22mm x 7mm (eg. https://www.amazon.de/gp/product/B07HGXXX37/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&language=en_GB¤cy=EUR ) 4x screw M6x10 4x screw M6x16 8x nut M6…
BOM required : ESP32 CMT2300A dev board with “E49-900M20S” chip OLED 0.96" screen “SSD1315” Dupont connectors External “868MHz~915MHz Antenna” with an IPEX4 <> Female SMA cable Use “Snug” support for both part and add “build plate only”…
Case (top and bottom) for OpenDTU hardware Printed on genius pro 0.2mm no support 2.5mm screws are needed to close the case. I used 2.5mm insert to attach ESP32 to the bottom (insert are heated thanks to soldering iron) You have 2…
Printer: Ender 5 plus Rafts: No Supports: No Resolution: 1 Infill: 15% Filament brand: Creality Filament color: Weiss Filament material: Pla
Simple case for the OpenDTU Adapter Board: https://github.com/dokuhn/openDTU-BreakoutBoard Printer must be quiet precise for the Snap on lid.
Case for the components of a Ahoy DTU. See the Ahoy DTU Project Page on Github: https://github.com/lumapu/ahoy The Ahoy DTU allows for communicating with a bunch of Hoymiles Microinverters for small sized Solar Systems. It is even…
Kleider / Jackenhaken 4-Fach für die Tür Auch Gut geeignet als Handtuchhalter fürs Badezimmer Druckeinstellung: Schichthöhe: 0,2mm Düse: 0,4mm Füllung: 20% Stützen: Ja (Cura Tree) Kunststoff: PLA+
This is a casing for an OpenDTU / AhojDTU made from 3 parts. This allows you to read the inverter data of your Hoymiles inverter e.g. for a balcony solar panel. For ordering the right electronic components see pictures. I ordered…
AhoyDTU: Wemos D1 Mini, 0,96" Display, NRF24L01+
PETG, high infill, 0,3mm bottom layers and 0,15 mm threaded layers.
This wind turbine is a remix of https://www.printables.com/de/model/785427-illusion-windturbine-200-250 https://www.printables.com/de/model/782829-windturbine-mk2-neo-remix…
Pressfit Housing for openDTU / ahoyDTU Datalogger. Made this to the smallest factor that makes sense. Used following Components to build: ESP-32S (used one from this set) NRF24L01+ (used one from this set) 6EA of the smallest Jumper Cable…
Haken für Handtücher oder Kleidung Passend für Heizkörper mit Rohrdurchmesser 23,5mm
Simple 3D library for openscad that makes it easy to generate the most common bar and tube profiles. See also: " https://github.com/quirxi/BarsAndTubes ". Print instructions Category: Other Summary Simple 3D library for openscad that…
The local kindergarden approached me and asked for a redesign. They lose those keys all the time. So I made a quick design and printed plenty of them for them. Feel free to support your local business and design small helpers.
A (3-)hook for the towel radiator for towels or other clothes. Can be optionally extended with an attachable extension to have more hooks. You need a minimum of support. Step file is also provided. 16.01.2024: Added a version with 2…
📄 OpenDTU Zerosolar PCB A compact enclosure specifically designed for the OpenDTU Community Board (SZ-OpenCB-V.5_0 by Nick Förster) with pre-soldered CMT2300A module – ideal for PV monitoring setups requiring minimal space and clean…
Clip-In-Handtuchhaken für Badregalfach - VW Grand California Designmerkmale: Passgenaue Clip-Geometrie: Die Halterung ist speziell auf den Durchmesser und Abstand der originalen Regalstangen im Badbereich des Grand California abgestimmt.…
A simple modern cubic towel hook for the kitchen or bathroom. It is attached using a strip of double-sided adhesive tape. Sticks best to smooth surfaces, such as tiles. Ein simpler, moderner, würfelmförmiger Handtuchhaken für das…
The case is intended for the OpenDTU Fusion board V2.3. It has pockets for the three antennas and a ventilation grille. Power is supplied via USB-C connector. It has two lids. One is the simple one with the ventilation grille only. The…
This is inspired by woodturning techniques and a variation of this little thing: https://www.prusaprinters.org/prints/103978-woodturning-bowl-02 If you like this little thing, you might want to check those ones, too:…
I had a SSD1306 0,96" OLED display which I wanted to use with my Open DTU. This Open DTU case was a perfect fit for my requirements but unfortunately it didn't include a cutout for the display. As the SSD1306 fits perfectly in the lid I…
I needed a replacement for my towel hooks which broke, so I create these. Printed with PLA on MK4: 0.6mm nozzle 0.2mm layer supports: a little below the hook tip (PrusaSlicer: “automatic paint support”) Use: Glue the wall part with…
Dieses OpenDTU Fusion v2.3 Case wurde speziell entwickelt, um ein 2.42”-Display in der Front aufzunehmen. Das Gehäuse bietet eine elegante und funktionale Lösung, um dein OpenDTU Fusion-Projekt sicher und übersichtlich zu verpacken.…
I designed a “military” designed ESP32 case for my balcony power plant solar. I use OpenDTU: https://github.com/tbnobody/OpenDTU Parts: 4x M3 Melting nuts: https://amzn.to/3E2j0Yb 4x M3 black screws: https://amzn.to/3KHriIL 1x ESP 32 with…
Sexy Handtuch-Öse " Strumfhalter " Die ist eine Öse für Handtücher die keinen Aufhänger besitzen oder bei denen dieser z.B. durch waschen verloren gegangen ist. Handtuchöse Öse 01 sollte mit einem festen Material wie z.B. ABS, PETG, Pla…
Handtuchhalter für die Glasscheibe der Dusche Die Größen sollten alle Glasscheibendicken von Duschen abdecken.
Designed for heating element with horizontal tubing with 20mm diameter and 18.1mm distance. Can be made to fit other dimensions by adjusting the FreeCAD model.
IKEA Handtuchhalter mit 2cm Basis - beim Mutterkonzern nicht mehr lieferbar. Im Silber dem Original sehr ähnlich. IKEA towel rail with 2cm base - no longer available from the parent company. Very similar to the original in silver.
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…
What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…
This towel dryer can be attached to a radiator of Buderus brand. (other brands not testet) Please print one left and one right part No supports needed Additional parts needed: 3 * rod or pipe (aluminum, 8mm diameter) of the desired length
Ein kleines Gehäuse, passend für D1mini V2 (muss mit Heißkleber fixiert werden) und D1mini V3 (Kann mit 2x2mm Schrauben verschraubt werden). Zusätzlich kann man das NRF24L01+ Modul mit Heißkleber auf dem Block an der Seite fixieren.
This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter. I often have a number of pieces on the go…
This is a very simple to make sharpening table, which allows near 100% repeatibility and keeps the table right next to the wheel at all angles due to the rotation pivot being so close to it. Printing Nothing interesting here. I used…
Customized version of https://www.thingiverse.com/thing:165198 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=165198 Print instructions Category: Organization Summary Customized version of…
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
Handtuchaufhangvorrichtungsverkürzungshaken in der Ausführung C5 oder auch kleiner Clip um Handtücher ohne Schlaufe aufzuhängen. Größe lässt sich anpassen, Z sollte aber mindestens 10 mm betragen. X und Y bitte proportional lassen. Tea…
Um eine Handtuch um Heizkörper aufhängen zu können
Housing for openDTU / Ahoi device based on ESP32 with SSD1306 OLED Display and one external antenna. The components are connected in a space-optimized manner using a circuit board developed for this purpose. The display is inserted into…
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…
Ein Haken für die Heizung gedruckt in ABS+.
NEUE Version Dieses OpenDTU Fusion v2.3 Case wurde speziell entwickelt, um ein 2.42”-Display in der Front aufzunehmen. Das Gehäuse bietet eine elegante und funktionale Lösung, um dein OpenDTU Fusion-Projekt sicher und übersichtlich zu…
A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
Time to organize the shop. Where do you put the lathe chucks so they can be found when needed. You put them on the wall using these easy chuck holders. They work best if you use Polycarbonate, but PETG or Nylon will work. Print them with…
Simple to print, works without TPU - i printed it in PLA. fasten with double-sided adhesive tape or screw no support
Handtuchhalterung für einen Heizkörper im Badezimmer
Handtuchhalter für den Handtuchheizkörper Die Größen sollten alle Durchmesser abdecken.
A small case designed for the ESP32 NodeMCU + EBYTE ML01DP5 (nRF24L01 +) with an external antenna. This case can be mounted on a wall using a screw/nail or suspended with a string. For the lid, I utilized 2x M3 screws and 2x ruthex…
Case for Wemos D1 mini (esp8266) + 0.96 inch Display Oled
Beschreibung https://ahoydtu.de/ Dimensions: 58 mm x 49 mm x 36,2 mm Added Mounting Holes to screw it on the Wall or ceiling.
You can use the jig like you would a Oneway Vari-grind jig, or use it with a holder for bar guided systems like the Sorby ProEdge or Tormek and similar wet sharpeners. UPDATE : The main part of the jig now comes in 3 sizes : 16mm and 19mm…
The prototype has been finished missing an alternator
This is the bowl version of Woodturning Vase 05 and I think it really works great as a bowl. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this…
