1 / 10
OpenDTU with CMT2300A case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case (top and bottom) for OpenDTU hardware
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 212
- Makes
- 1
- Views
- 1,884
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case (top and bottom) for OpenDTU hardware
Printed on genius pro
0.2mm no support
2.5mm screws are needed to close the case.
I used 2.5mm insert to attach ESP32 to the bottom (insert are heated thanks to soldering iron)
You have 2 possible place for the antenna : on the top of the case or on the bottom
Holes are closed by default. You can break the hole cover to choose the right place for you.