1 / 6
Finishing faceplate for woodturning lathe — image 1
1 / 6

Finishing faceplate for woodturning lathe

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

80mm faceplate with 1" X 8 TPI thread intended to be used for finishing turned work on a lathe.

Rating
0 / 5
Likes
17
Downloads
111
Makes
0
Views
664
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter.

I often have a number of pieces on the go at the same time and so have a need for multiple faceplates when finishig these. Rather than keep swapping one faceplate between multiple pieces or buying more expesive steel faceplates when finishing a piece of work I decided to print a few.

Can be used when sanding, varnishing, oiling, painting... whatever you do to finish your turned work.

Printed with 1mm walls, top and bottom and 40% infill.
 

Tags