1 / 6
Finishing faceplate for woodturning lathe — zdjęcie 1
1 / 6

Finishing faceplate for woodturning lathe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

80mm faceplate with 1" X 8 TPI thread intended to be used for finishing turned work on a lathe.

Ocena
0 / 5
Polubienia
17
Pobrania
111
Wydruki
0
Wyświetlenia
661
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter.

I often have a number of pieces on the go at the same time and so have a need for multiple faceplates when finishig these. Rather than keep swapping one faceplate between multiple pieces or buying more expesive steel faceplates when finishing a piece of work I decided to print a few.

Can be used when sanding, varnishing, oiling, painting... whatever you do to finish your turned work.

Printed with 1mm walls, top and bottom and 40% infill.
 

Tagi