M710q Tiny 3.5"HDD mod Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Goal of this project is to add a 3.5" Harddisk and use internal Sata & 12V with a Lenovo M710q Tiny
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D Model for Lenovo M710q Tiny PC
This custom 3D-printed HDD mount enables seamless integration of a 3.5" hard drive into the compact Lenovo M710q Tiny PC, leveraging internal SATA and 12V power for a clean, functional upgrade. The design features a lightweight honeycomb structure for durability and airflow optimization.
Here is the Project on Github: https://github.com/Andurilll/M710q-Tiny-3.5-HDD-mod
Key Features
- Honeycomb Pattern: Reduces weight while maintaining structural integrity and improving HDD ventilation.
- Compatibility: Tailored for the Lenovo M710q Tiny chassis, supporting standard 3.5" HDDs.
- Integrated Power Solution: Utilizes the motherboard’s internal 12V SATA power via modified cabling.
Print Settings (FDM Recommendations)
- Layer Height: 0.2 mm (Standard Quality)
- Infill: 20–30% Gyroid or Grid for balance between strength and material efficiency
- Material: PLA, PETG, or ASA (for higher heat resistance in enclosed spaces)
- Nozzle Temperature: 200–220°C (PLA)
- Print Speed: 50–80 mm/s for optimal detail retention
Applications
- Expands storage capacity for home servers, NAS setups, or media centers.
Note: Requires minor SATA power cable modification to tap into the motherboard’s 12V rail. Ensure proper insulation for safety.