1 / 3
Onewheel Foot Holds Top Fender Mount — zdjęcie 1
1 / 3

Onewheel Foot Holds Top Fender Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add a top fender piece to any of my foot hold fenders!

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Public Domain

This mount can be used to add a top fender to any of my Foot Hold Fenders. Simply bolt the mount onto the inside of the half fenders and you are good. 

To create the fender piece purchase this plastic sheet: https://www.amazon.com/gp/product/B0CSSX1WCL

When you have the mount pieces on your board, cut out a long strip of plastic and progressively cut it shorter to determine the right arc shape and length for your fender. Then measure the width of your tire. Using the strip, cut out a rectangle shape of plastic that will be your fender. Finally, cut out a tab in the plastic that is 82mm wide by 16mm long. You may also have to cut off the corners of the fender to fit. 

Tagi