Red Dragon m913 mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
taking the guts of the m913 and rebuilding it
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- BSD License
taking the guts of the m913 and rebuilding it.
What you need for the electronics:
Red Dragon m913, clones like E-Yooso X-33 should work too.
4 x m2x4 countersunk
2 x m2x6
1 x m3x6 countersunk
1 x m3x8 countersunk
2 x m3x12 normal
1 x m3x8 normal
4 x m3 nuts
Tools:
Screw driver
Soldering Iron
Desoldering Iron/Solder wick
Keycaps used: https://github.com/braindefender/KLP-Lame-Keycaps
Screw driver for the azeron tilt stand can be used to tighten the screw: https://www.thingiverse.com/thing:6028517
Assembly Instructions after everything is soldered:
1. add nut to bar piece
2. screw bar piece to mouse pcb back with m3x6 countersunk screw
3. put on front cover, screw it in with m2x4
4. put on back cover, screw in bottom with m2x4
5. screw bar to mouse pcb with m3x8
6. add nuts to palmrest
7. screw on palmrest with 2 x m3x12 screws.8. put main pcb on basePiece and secure using the secure bar with 2 m2x6 coutersunk8. add thumb cluster pcb to fingerPCB piece and use the original screws to screw it on.
9. add nut and screw the dpi selector pcb to the fingerPCB piece
10. plug in battery, dpi selector pcb wires.
11. position fingerPCB on mouse body and screw in the side screw (m2x4)
12. screw in the botton screw to secure fingerPCB (m2x4)
13. plug in thumb cluster ribbon cable
14. Assemble and screw with the big screw