2kg and large spool holder extension REMIXED - no snapping
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the two different 2kg spool holders
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Two types of 2kg spool extensions combined with a bolt and nut.
All these can be combined and/or used with another extension to lift the large diameter spool up by 4 cm. For the lift, it needs another support on the side due to the high weight of the spool (or at least a counterweight spool to prevent excessive bending).
Printed in PETG… 100% filling to make sure but it worked well with PLA and 20% filling as well.
These extensions work well with the original (short) spool holders from Prusa, which were not printed but made of heavy duty black material (their studs never snap).
Enjoy.