Scaled And Icy Hueforge | Twenty One Pilots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled And Icy Album Hueforge |-/
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Scaled And Icy Album Hueforge! |-/
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.8mm and the Actual Depth is 2.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox Pink Transmission Distance: 12
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Pink
At layer #15 (1.28mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Yellow
At layer #28 (2.32mm) swap to Jade White for the rest.
… or use the .3mf file ;)
If you're using an AMS with 4 slots, swap the black filament with the white one as soon as the black layers are finished, since this model uses 5 colors.