Picture Hanging Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to hang pictures, a la the "Go Hang It!" tool
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Tool to help hang pictures on the wall. Similar to the “Go Hang It!”, which can be found on Amazon. If you have a printer larger than the MINI, you might be best served by printing the original. (This one might be too short for handing larger frames.)
A commenter on the original indicated the holes in the three hooks are too small for marking a spot on the wall, and the best method is to drill the holes larger to match a nail, awl or other sharp-pointed tool you have. I agree, as this therefore lets you match hole size to your tool, as opposed to printing a larger hole that may not work for everyone. (If you don't have a drill, then you will likely want to remix this to enlarge the hole size.)
Two files included. The second has holes for 4.8 mm square magnets, for holding a level, as shown in photos. (I don't recall if the magnets I bought were nominally 5 mm square. But they measure 4.8 mm, so the hole is 4.9 mm and they fit perfect. Held in with a little super glue.)