Picture Hanging Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool to hang pictures, a la the "Go Hang It!" tool
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Tool to help hang pictures on the wall. Similar to the “Go Hang It!”, which can be found on Amazon. If you have a printer larger than the MINI, you might be best served by printing the original. (This one might be too short for handing larger frames.)
A commenter on the original indicated the holes in the three hooks are too small for marking a spot on the wall, and the best method is to drill the holes larger to match a nail, awl or other sharp-pointed tool you have. I agree, as this therefore lets you match hole size to your tool, as opposed to printing a larger hole that may not work for everyone. (If you don't have a drill, then you will likely want to remix this to enlarge the hole size.)
Two files included. The second has holes for 4.8 mm square magnets, for holding a level, as shown in photos. (I don't recall if the magnets I bought were nominally 5 mm square. But they measure 4.8 mm, so the hole is 4.9 mm and they fit perfect. Held in with a little super glue.)