Battery powered tungsten grinder for WIG welding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tungsten grinder Attachment for Parkside rotary tool PFBS 12 C7 or all tools with 18x1.5mm thread
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This my own version of a tungsten grinder attachment which uses the electrode collets as a grinding guide. Inspired by Clough42's model (I created it from scratch in Onshape because I was too dumb to figure out Fusion 360 and could't change the thread pitch for my needs).
I specifically designed it to fit the Parkside “PFBS 12 C7” battery rotary tool, the thread size is 18x1,5mm. The available angles are 15, 30, 45 and 60°.
I've undersized the holes for the collets and drilled them out afterwards with a 5.2mm drill bit, the collets afterwards still fit to tight, I attached a collet into the drill and used it as a reamer, the collets the fit very well.
Please msg me if you like my model and need changes.