Battery powered tungsten grinder for WIG welding
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tungsten grinder Attachment for Parkside rotary tool PFBS 12 C7 or all tools with 18x1.5mm thread
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This my own version of a tungsten grinder attachment which uses the electrode collets as a grinding guide. Inspired by Clough42's model (I created it from scratch in Onshape because I was too dumb to figure out Fusion 360 and could't change the thread pitch for my needs).
I specifically designed it to fit the Parkside “PFBS 12 C7” battery rotary tool, the thread size is 18x1,5mm. The available angles are 15, 30, 45 and 60°.
I've undersized the holes for the collets and drilled them out afterwards with a 5.2mm drill bit, the collets afterwards still fit to tight, I attached a collet into the drill and used it as a reamer, the collets the fit very well.
Please msg me if you like my model and need changes.