Colorfabb Varioshore Settings K2 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Settings to get you started printing Varioshore
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The filament is fairly expensive, but worth every Penny! It prints beautifully with less stringing than regular TPU and easier?! It feels absolutly awesome to the touch and looks amazing! It tends to do surprisingly well without supports, as seen in the pictures. Even PLA would have struggled with the inside of the wheel…
I will expand the settings as I develop them. I recommend printing with a 0.4mm nozzle at 0,2mm layer height and alt least for small objects increase wall count untill you have 100% infill to get an even resistance throughout your object. Otherwise the top and bottom of your print will feel harder due to top/bottom layers vs infill.
I hope this takes away the apprehension of using this filament for some and allows you to have success right out of the box.