1 / 2
Anycubic Kobra Neo - Orcaslicer Presets - Klipper — zdjęcie 1
1 / 2

Anycubic Kobra Neo - Orcaslicer Presets - Klipper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My custom printer/filament/proccess presets ofAnycubic Kobra Neo for OrcaSlicer

Ocena
0 / 5
Polubienia
5
Pobrania
126
Wydruki
0
Wyświetlenia
536
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

WARNING: I am not responsable for any damage to your printer, check ALL the settings/configs and verify by yourself before printing, specially with klipper configs
 

Sharing my OrcaSlicer settings for Anycubic Kobra Neo with Klipper firmware

extract the zip contents, then import to OrcaSlicer using File→Import→Import configs
under printer setting you can load the build plate texture PNG and STL model 

make sure to recalibrate Pressure Advance, or disable it and use your own printer.cfg for your klipper setup

the printer preset contains my custom gcodes for klipper and klipper screen.

if you want my klipper setup (config files) it can be found here:
https://github.com/Kellwaxx11/klipper-backup/tree/main/printer_data/config 

for klipper setup, credits to @1coderookie at github for his amazing guide and wiki for Kobra Neo & Go 
highly recomended to check it out 
https://1coderookie.github.io/KobraGoNeoInsights/firmware/fw_klipper/

 

Tagi