Kappy heated bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pcb production files for a heater designed for kappy
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
additional bom
1x pei plate (150 or 165 will fit)
1x magnetic sheet
1x temperature probe (cutout is sized for a 15x3mm 3950 thermistor)
the Production file can be used at your pcb provder of choice with 1oz copper weight.
this will result in about a 24V 60W-80W heater that takes about 5 minutes to heat the alu plate to 60 degrees(at 60W). orders vary in resistance in different batches. if you do order some please document your vendor and wattage for a larger sample size. jlcpcb varies from 56-72W
the temperature probe can be siliconed directly to the alu plate through the cutout (hot-glue should also be ok)
make sure the wires have enough strain relief and enough space to move around