Kappy heated bed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pcb production files for a heater designed for kappy
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 52
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
additional bom
1x pei plate (150 or 165 will fit)
1x magnetic sheet
1x temperature probe (cutout is sized for a 15x3mm 3950 thermistor)
the Production file can be used at your pcb provder of choice with 1oz copper weight.
this will result in about a 24V 60W-80W heater that takes about 5 minutes to heat the alu plate to 60 degrees(at 60W). orders vary in resistance in different batches. if you do order some please document your vendor and wattage for a larger sample size. jlcpcb varies from 56-72W
the temperature probe can be siliconed directly to the alu plate through the cutout (hot-glue should also be ok)
make sure the wires have enough strain relief and enough space to move around