Monsgeek M1 Solid (Stiff) Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hard gaskets as an alternative to the included gaskets of the Monsgeek M1 keyboard for stiffer typing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This design is for owners of the monsgeek m1 (and possibly other monsgeek or akko boards using the same gaskets) to adjust the overall stiffness of the typing feel.
I’ve owned this board for a while and it’s my first with significant flex and compliance when the keybed is pressed. When combined with silent switches (which contain similar silicone dampeners inside the switch) it got to be too much in terms of springiness and “mushiness” - so I swapped the board gaskets which fixed the issue.
These are a little thinner than the silicone gaskets included because it is designed to be printed with incompressible material (PLA,PETG, etc.) - board should securely screw closed with minimal gap between top and bottom with these installed.