1 / 3

Tubular Key Cover Label

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sleeve to help identify tubular keys

Aktualizacja u źródła: 15 lut 2025

Informacje o modelu

As an American, I have more crap than I have space to keep it all. So I decided to rent a SECOND storage unit to keep stuff in.

The keys for the units look very similar, so I made a little sleeve to slip over each to help identify them.

There's the key for the “big” locker and the key for the little or “li'l” one.

I've included a black STL for anyone to use as well as the F3D file.

The Fusion 360 file has the timeline rolled back to give a blank key. There are two sketches with text to edit.

I suggest maxing out at 3 characters and NOT putting a unit number on them!

If you lose the key, it's best no one can figure out which unit it goes to, right?

Should fit keys with about a 17x18.6mm “handle.”

Printed on a Bambu Labs A1 Mini with 0.4mm Nozzle
Printed at 0.12mm layer lines
- .2 is fine, but it helped with the lettering fidelity
3 walls; infill doesn't matter as it's not applied
Printed in PLA
- PETG should be fine, but I didn't see a need for the strength
Supports were not needed
Raft at your discretion, but a glue stick held these to the bed just fine