Tubular Key Cover Label
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleeve to help identify tubular keys
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
As an American, I have more crap than I have space to keep it all. So I decided to rent a SECOND storage unit to keep stuff in.
The keys for the units look very similar, so I made a little sleeve to slip over each to help identify them.
There's the key for the “big” locker and the key for the little or “li'l” one.
I've included a black STL for anyone to use as well as the F3D file.
The Fusion 360 file has the timeline rolled back to give a blank key. There are two sketches with text to edit.
I suggest maxing out at 3 characters and NOT putting a unit number on them!
If you lose the key, it's best no one can figure out which unit it goes to, right?
Should fit keys with about a 17x18.6mm “handle.”
Printing notes
- Printed on a Bambu Labs A1 Mini with 0.4mm Nozzle
- Printed at 0.12mm layer lines
- .2 is fine, but it helped with the lettering fidelity
- 3 walls; infill doesn't matter as it's not applied
- Printed in PLA
- PETG should be fine, but I didn't see a need for the strength
- Supports were not needed
- Raft at your discretion, but a glue stick held these to the bed just fine