Ninja Thirsti carbonated drink maker flavor bottle wall rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall rack that holds 6 Ninja Thirsti flavoring bottles. It can be mounted with 3M Velcro Command Strips.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT July 12, 2025: I have added a pre-made 4-slot model for those with smaller print beds who did not know how to combine the individual module in their slicers.
This is a wall rack designed from scratch for the Ninja Thirsti carbonated drink maker. It can hold up to 6 flavoring bottles. It can be easily wall-mounted with 3M Velcro Command Strips. I have included a picture of the strips I use. Alternatively, it can be drilled to support screw-based mounting.
I have included the full 6-unit model with nice edge chamfers and also a single “raw” module that you can place side-by-side and boolean together to create a smaller one. (Naturally, this single version does not have chamfers as that would interfere with layout.) If possible, I recommend using the full model as it will have nice, softened edges and corners, preventing any annoying scrapes and pokes if it is placed out of view under a cabinet.
I recommend printing with 4 perimeters and 15% grid infill for strength.