Ninja Thirsti carbonated drink maker flavor bottle wall rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall rack that holds 6 Ninja Thirsti flavoring bottles. It can be mounted with 3M Velcro Command Strips.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT July 12, 2025: I have added a pre-made 4-slot model for those with smaller print beds who did not know how to combine the individual module in their slicers.
This is a wall rack designed from scratch for the Ninja Thirsti carbonated drink maker. It can hold up to 6 flavoring bottles. It can be easily wall-mounted with 3M Velcro Command Strips. I have included a picture of the strips I use. Alternatively, it can be drilled to support screw-based mounting.
I have included the full 6-unit model with nice edge chamfers and also a single “raw” module that you can place side-by-side and boolean together to create a smaller one. (Naturally, this single version does not have chamfers as that would interfere with layout.) If possible, I recommend using the full model as it will have nice, softened edges and corners, preventing any annoying scrapes and pokes if it is placed out of view under a cabinet.
I recommend printing with 4 perimeters and 15% grid infill for strength.