1 / 2
A hand-knob for M6 bolts (10mm hex-head) — zdjęcie 1
1 / 2

A hand-knob for M6 bolts (10mm hex-head)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A knob for M6 bolts. uses a snap in retainer that is removeable to hold the bolt in. Good for high torque.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The molded on knob for my Halot Mage that holds the print plate in place fell apart after exposure to denatured alcohol for too long (go figure…I thought that they would use something chemical resistant to a common resin cleaning chemical…).

Knocked out a new design in Fusion quickly. Works very well and fits perfect the first time. Uses a removeable snap in retention cap piece to keep the bolt in place.

I'd recommend at least 5 perimeter walls if you want the portion holding the hex head of the bolt to handle high torque.

I printed the example in ASA with 5 perimeters and 20% infill.

Tagi