M3nEs alternative SPRING LEAF NUTS (M3,M4) used on PRUSA printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short print of the spring leaf nut, which you can find in the Prusa parts BOM under the name M3nEs
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 176
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I got into a situation where I really needed these nuts but they weren't at hand... There are models here but I like to create and test my own models... So these are a simple classic alternative with an inserted hex nut in two variants M3 and M4. It will serve its purpose well... They can be easily put on and taken off...The nuts in the photo were printed from PETG and a 0.25 nozzle...I always use it when I print smaller parts...However, with a regular 0.4 nozzle there should be no problem...I would be happy for feedback...
Happy Printing…
PEEVES