P
Printables
Drill bit for hurricane shutter wing nuts.
Made for any normal drill it is plastic so be gentle but it holds up really well in a drill.
Wyniki wyszukiwania: nuts
Liczymy pasujące modele…
P
Printables
Star Head Clamping Nuts Knob m8
PUT M8 x 1.25 LONG (28mm or 1.1") HEX NUT AND GLUE SPACER TO THE BOTTOM SLOWLY, HIGH TEMPRATURE.
P
Printables
Z-axis Mod with Hex Nuts for Sovol SV06 or SV06 Plus
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame. I made this remix as my SV06 Plus' z-coupler did not fit inside the original…
P
Printables
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
P
Printables
Prusa XL Tool - Twist Lock Calibration Pin Holder (no screws/nuts needed)
The calibration pin is infrequently used, but essential. Keep it attached to your xl so it never gets lost. Check out my other Prusa XL Accessories: https://www.printables.com/@Jupera/collections/2212644
P
Printables
10" rack rails, handles, sides + bolts and nuts
Printable rack rails and matching 6mm nuts and bolts to mount your (lightweight) equipment in 10" DIY racks There are lots of options for printable rails out there, but I wanted something where I could mount side panels and have…
P
Printables
T-Nuts
T-Nuts I was approached by a local fire department to make mounts for small fire truck equipment. I modeled T-nuts, with a thread, which are screwed to the washer using an Allen screw. I printed the washers for durability from ASA…
P
Printables
Wing-Nuts (Wingnuts, Knobs) - Metric and Inch
These prints are used to make wing-nuts when combined with the appropriate size hex nuts. Note : For related Thumb Nuts and other knob and screw related prints see this collection : https://www.printables.com/@kaje/collections/719205 The…
P
Printables
Locknuts, Blanking Plugs, Bushing and Washers
A collection of blanking plugs, bushing, locknuts and washers. Blanking Plugs: for blocking off holes in metal trunking, panels or equipment racks. Plain circular with screwdriver slots (BPP) or hexagonal (BPH). Bushing: for routing a…
P
Printables
Sailboat Shroud adjuster wheel for 3mm and 2-56 nuts
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
P
Printables
Magnetic micro Bit Hand Holder for 1/4' Bits Nuts
Magnetic micro Bit Hand Holder for 1/4' Bits Nuts 1 round Magnet 5mm Diameter / 3 mm Thickness Designed with ❤ by cforms
P
Printables
Flower Like Fidget With M10 Nuts
For the spinner is required standard skate 608 bearing (inner di 8 mm, outer di 22 mm, width 7mm) and 5 M10 nuts. Spinner diameter 78 mm. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.1 - 0.25 Infill: 20-70%…
P
Printables
Thread for Nuts and Bolts
Thread for Nuts and Bolts with 60 segments 1 circle. Diameters 52/60mm, gradient 6mm, gap 0,8/0,6mm. Scalable down to e.g. 10,4/12mm. Available formats: skp, dxf, dwg
P
Printables
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
P
Printables
21mm wheel lock nuts tray milwaukee
For mechanics to store 6 wheel lock nuts 21mm Holes to add magnets size 10x3mm
P
Printables
Variable box for mounting on SKÅDIS using M2.5 T-Nuts
I needed a box to hold the screw set I bought for use with T-Nuts - and of course this box had to use T-Nuts themselves. This one fits a box with 100mm x 24mm and uses M2.5 screws with 16mm length for the T-Nuts. If you don't know much…
P
Printables
Vogel apennootjes zak vuller trechter, grote . Bird monkey nuts bag filler funnel, large.
Gewoon een grote trechter om van de grote zak apennootjes een kleinere zak te vullen zonder te morsen. Simply use a large funnel to transfer the large bag of monkey nuts into a smaller bag without spilling. Simplemente use un embudo…
P
Printables
Walnut Bowl to Keep your Nuts in for Christmas
Walnut Shaped Bowl to keep you Christmas nuts in. Printed in brown PLA with a dark brown wash painted on afterwards. It is fairly large, so it can always be reduced in size. Print with flat bottom on the print bed. No supports needed. If…
P
Printables
8 inch rods and Hex Nuts for Blaster Stock
I created these for my dart blasters as I couldn't find any in this length. 2 rods for left and right plus some nuts. Be for warned, slowing down massively the top because it start vibrating a lot. I printed these in PLA+, but would…
P
Printables
Modular Hardware Storage Drawers (Nuts, Bolts & Washers) + Label Plates
Files Included Container / module body Sliding drawer Label plate Printing Notes Designed to print support-free in common orientations. Recommended materials: PLA or PETG Suggested settings: 0.20 mm layer height , 3 walls , 10–20% infill…
P
Printables
drawer handle with pockets for m6 nuts
simple drawer / cabinet handle used for a camper build
P
Printables
Mikrotik RB5009 / L009 rack mount with hex nuts
Remix of EHY_3dp's model. I didn't have threaded inserts and wanted to use M4 hex nuts instead.
P
Printables
Dozents of UNC Acorn Dome Nuts with Precise Threads
Unc Acorn Dome Nut These acorn dome nuts provide a decorative finish while securing threaded connections. Ideal for visible applications where aesthetics matter, such as furniture assembly, decorative hardware, and consumer products.…
P
Printables
Toilet seat nuts
Toilet seat nuts in M6 and M8 threaded and unthreaded versions. There are 8 different versions to choose from. The unthreaded ones have a smaller hole suitable for threading with an engineers tap which is what I prefer however you must…
P
Printables
Linked Dipole Connector Bracket for Wago 221-2401 Lever Nuts
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in…
P
Printables
Rack rail 4U for cage nuts
Rack Rail for test builds. No Supports needed. Printed mine from PETG. Added second model with 2 holes per 1U
P
Printables
Rabeneick Binetta Superstar screws / nuts for the side covers
Rabeneick Binetta Superstar screws / nuts for the side covers. There is a 5mm thread inside the nut so you can use these almost in any place of mopeds or motorcycles.
P
Printables
Brass knuckle, very durable. For cracking nuts!
Really solidly made brass knuckle. It should be printed with 10 walls and 100% infill. The 3MF file is configured and ready for printing; the STL file requires manual setup according to your preference — it just needs to be separated into…
P
Printables
bolt and nuts
bolt for use to adapt anycubic filament holder to accept rolls with smaller hole
P
Printables
Prusa Core One Door Fastener (Square nuts)
I used a couple of spare M3x10rT screws and M3 square nuts that came with my Core One kit. Print with 3 perimeters and 0.20mm layer height.
P
Printables
Dremel Drill Press Soldering Iron Adapter with Hex Nuts
Dremel Drill Press Soldering Iron Adapter with Hex Nuts
P
Printables
Universal Centering Cone Axles and Nuts for Bambu Lab Filament Spool Switcher & Winder
A combination of the spool axles and nuts from the original model by @MiklosKiszely_486882 with the universal centering cones from STORM DESIGN (@Damian27) . This saves a couple of parts, avoids centering discs for different spools and…
P
Printables
Tool holder 30x30 for IKEA SKADIS pegboard (T-Nuts)
30x30mm Heavy Tool Holder - IKEA Skadis A specialized holder for heavy crimpers and oversized hand tools. Hole Size: 30x30mm Compatibility: IKEA Skadis Mounting: Uses the Skadis T-Nuts Mounting System for Ikea Skadis Pegboards
P
Printables
Organizer for bolts and nuts
Useful when you're need to put the bolts in piles. Easy to reach cause smooth corner.
P
Printables
bowl for popcorn, chips/crisps and peanuts with chopsticks zo you dont need to wash your hands
WARNING! chokinghazard fillament can get off while you are eating
P
Printables
Skadis Key & Coin Tray with T-Nuts Mounting System
Tray (170mm x 120mm x 20mm) for Skadis board using T-Nuts Mounting System
P
Printables
Sample holder for metric screws and nuts
Working in a technical office, it's normal for a worn, rusty, and worn-out part to arrive, and I didn't want to have to go back and forth to the workshop all the time, so I designed this metric screw holder, with a sample for nuts…
P
Printables
Decorative Bowl for Nuts or Sweets - no supports
A very simple bowl for sweets, nuts, or snacks. Can also be used to hold a flower pot. Or as a simple decoration. No support structures needed. The FreeCAD 1.1 design model is included if you want to modify it. Printing GCode for Prusa…
P
Printables
Skadis T-Nuts Mounting System for Ikea Skadis Pegboards
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
P
Printables
Box/shelf with drawers for nuts and bolts
Shelf size: roughly a cube of 15cm There are various drawers, with different subdivisions. If you need to customize it, I can send the Fusion360 source with parametric properties.
P
Printables
JP ModOr inserts for nuts & bolts module 40
Update! 02-12-2023 These inserts now only fit the new versions of de module's drawers. The new drawers are 31mm instead of the orignal 28mm. New drawers still fit the original modules. These inserts fit the JP modulair organizer tower…
P
Printables
Replacement EZ Grip Nuts for Sugar Cookie Press
It's unlikely that anyone will have the same model of press, but here it is. The minor diameter of the double helix thread is 1.98" (major diameter 2.1") with a .25" pitch.
P
Printables
Hammer K3/B3/C3 Nutstein M8
Ein Nutstein der Größe M8 für den Schiebetisch der Hammer K3/B3/C3. Benötigt wird noch eine M8 Mutter. ACHTUNG! Die Benutzung der hier dargestellten Druckteile/Werkzeuge erfolgt auf eigenes Risiko und Gefahr; der Einsteller übernimmt…
P
Printables
Knob for M6 nuts & bolts
Numerous models for knobs are available out there, yet I sought to create one as a simple 3D modeling exercise. Moreover I wanted a knob that could comfortably fit in my hand. This part was printed using Bambu Lab's PLA-CF and…
P
Printables
Hammer K3/B3/C3 Nutstein M6
Ein Nutstein der Größe M6 für den Schiebetisch der Hammer K3/B3/C3. Benötigt wird noch eine M6 Mutter. ACHTUNG! Die Benutzung der hier dargestellten Druckteile/Werkzeuge erfolgt auf eigenes Risiko und Gefahr; der Einsteller übernimmt…
P
Printables
STEMFIE - Fasteners - Nuts - Threaded - Cap Nuts
The complete set of #Stemfie3D cap nuts. STEMFIE news 👉 X.com/stemfie3d
P
Printables
HEX nuts socket 12 adapter
Easy to print and versatile HEX nuts socket 12 adapters. Included 6 different sizes: M6 nut to M12 socket - STL M7 nut to M12 socket - STL M8 nut to M12 socket - STL M9 nut to M12 socket - STL M10 nut to M12 socket - STL M11 nut to M12…
P
Printables
Insert bronze nuts press
Press for inserts. The dimensions are such that you can print on a Prusa MKx, Creality K1 and K1max. Use a filament with good mechanical strength such as PETg. The post must be printed lying groove face down, do not skip the number of…
P
Printables
Peanuts - Woodstock Freestanding Remix
Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…
P
Printables
Clamping trashbag roll storage max 10mm/4 inch diameter - clamp on the backside INCLUDING NUTS
Niche usecase: I have a 18mm 'floating' board in the back of my kitchen cabinet. I figured thats free real estate! It uses a clamping mechanism which I thought is clever. There are threaded cilinders that move through a surface without…
P
Printables
Spacesaving Gridfinity 5(9)x1 container for M2 and M3 screws, nuts, washers and locks
This is a collection of 5x1 gridfinity base sizes with 9 seperate spaces for M2/M3 screws, nuts, washers and locks. Each unit fits at least 40 pieces - but can go up to 150 (depending on categroy). The STL models are included to either do…
P
Printables
Dunkin Donuts Lightbox LED Lamp
Brighten up your space with this charming 3D printable lightbox featuring the iconic Dunkin' Donuts logo. Crafted with precision and nostalgic charm, this emblematic design pays homage to the beloved coffee and donut chain. Perfect for…
P
Printables
PINDA Nuts to not have to replace your extruder body
Just use the gcode and print in in PETG then put one nut on top and one nut below and recallibrate your PINDA. Now you never have to rebuild your extruder body when your PINDA holder breaks or not holds the PINDA in place. Will save you…
P
Printables
DIN screws/bolts and nuts
Library to create metric screws according DIN912 (socket head) and DIN933 (full thread hex bolt), nuts according DIN934 (hexagonal nut), DIN439B (hex nut flat) and a sketch for DIN125(washers). I know.. just another library for something…
P
Printables
Shelly 1PM Mini 2020 Mount (with WAGO nuts)
Mounting bracket to fit a Shelly 1PM Mini and three WAGO 221-415 lever nuts to a 2020 extrusion in a space efficient manner. Mounting requires two M5 roll-in T-nuts and M5 BHCS 10mm screws.
P
Printables
Headnuts metric M4 M5 M6 M8
A printable version of metric headnuts M4 M5 M6 M8 according to DIN1587. INSTRUCTIONS No supports needed. Recommended: 0.4mm nozzle and PETG M4, M5, M6 → 0.12mm layer height M8 → 0.2mm layer height If you have a good calibrated printer…
P
Printables
Bosch IXO VI: IKEA Skadis (T-Nuts)
Securely attach a Bosch IXO VI with its bits to a SKADIS pegboard using T-Nuts. This remix scores points over the original with its more robust mounting system. Created after printing the original and breaking off its hooks. No supports…
P
Printables
X-axis motor cover(Normal Aluminum Extrusion 2020 and T8 anti-backlash nuts)
The original file was provided specifically for Lerdge iX custom aluminum profiles, so I modified this part. It can currently be used with ordinary aluminum extrusion 2020. At the same time, I modified the original round hole for…
P
Printables
bolts and nuts container optimalised
it is a optimalised bolts and nuts container for sorting bolts.
P
Printables
Automatic M5,M4,M3 nuts sorting box
You can feed the nuts from the hole in the box. Shaking it they will be filtered in the right drawer. Works for M5,M4 and M3 nuts.
P
Printables
M6 Knobs with captive nuts
Really like the originating model, but I don't have a set up for heated inserts. Captive nuts are pretty nice, what can I say? Ideally, this will need 1-2 m6 washers. There's only 3 layers above and below the nut.
P
Printables
M8 rode and nuts for SPANNERHANDS
M8 rode and nuts for SPANNERHANDS spool holder. Its simple, low cost and elegant Category: 3D Printer Accessories
P
Printables
NUT SORTER by size (nuts, bearing elements, coins, ...)
Send rolling elements, nuts or coins and sort them by size! *The template (yellow) and sorting box (purple) are designed for sorting nuts in sizes M3, M4, M5 and M6 *any sorting template of the same size can be used Printing requires…
P
Printables
Handle for Acros DIY headset tool, for M12 nuts
These handles make using the DIY headset tool from Acros a lot more enjoyable. Press the two M12 nuts into the handles and use the tool as before. The handles make working with the tool a lot quicker and more comfortable as no wrenches…
P
Printables
Ryobi PCG002 Charger for Ikea Skadis - T3 T-Nuts
I wanted a IKEA Skadis Mount for my Ryobi PCG002 Charger. This design uses M3 T-Nuts Parts Used: (6) M3 x 10-12mm Long SHCS (6) M3 T-Nuts for Skadis by ORM - Found Here Print Settings: Material: PLA Supports: Enabled for the pegs. I…
P
Printables
Parametric M6 and M8 Cymbal Nuts with Captive Nut for Drum Set
Parametric M6 and M8 Cymbal Nuts for Drum Set This is just a simple cymbal nut for a drum set. I have included versions for a captive M6 and M8 nut, but I have also included the parametric fusion file in case you need a taller or shorter…
P
Printables
Safety Cap for M6 Nuts
I saw a spec of 9.78 to 10mm for an M6 bolts. I designed this with exactly 10mm opening and the PLA+ print was a snug press fit exactly as intended.
P
Printables
Metric Bolts and Nuts - working threads with adjusted Fusion Thread settings .xml file
Fed up with having to manually adjust thread faces in Fusion 360 to give a clearance, I worked on creating an adjusted Fusion 360 Thread parameter file. Note even these maximum clearance threads will still require ‘breaking in’ so that…
P
Printables
Vesa 75x75 with hot melt brass insert nuts
Vesa mount for portable monitor. I used M4x4mm melt thread knurled brass nuts. And stuck vesa on monitor with strong double side tape. ABS 35% filling.
P
Printables
M3ns nuts handles (with and without Prusa Logo)
You will, of course, need: 2 x m3ns nuts Flathead screw driver to push them in maybe?
P
Printables
Celtic Cross Mountable - Embedded M3 Nuts
Printed in Bambu PLA Matte - 15% infill - 0.08mm layers with 0.4 nozzle Hardware required: 4x M3 nuts 4x M3 bolts (whatever length required) There is some excess space left after the nut to allow some leeway with the screw length Need to…
P
Printables
Organizer nuts Organizer bolts screws box easy printable without support
Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.
P
Printables
Organizer nuts Organizer bolts screws box easy printable without support
Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.
P
Printables
Closed Spanner Wrench for 1 Inch Nuts
This is a closed spanner for octagonal nuts of 1 Inch *(40.9mm). Print in PETG for best results. --- I've invested countless hours in design, testing, and engineering to make all my projects and designs freely available to everyone. If…
P
Printables
Squirrel - plate for nuts
This can be used as a plate for dried fruits or nuts or raisins. It is suitable even for sweets or m&m dragees. It is better to print with a thread for wood.
P
Printables
Drill bit for hurricane shutter wing nuts.
Made for any normal drill it is plastic so be gentle but it holds up really well in a drill.
P
Printables
Ender-3 V3 Plus Side Mount Filament Spool With Nuts
Just Added an M3 Nuts Boolean, to put in place the nut when is printing. I used two M4 x 10mm bolt to fix the support where the T bolts was. I used a M3 x 12mm bolt to fix the support on the front.
P
Printables
Meanwell LRS 100 series DIN Adapter using M4 Nuts no sides
Just cut off the side part as its should be strong enough. Also Tridents usually run inverted electronics ;) Voron part is shared under the original License, see their github. https://github.com/VoronDesign/Voron-Trident/blob/main/LICENSE
P
Printables
T-Track for Dewalt Table Saw with M6 Nuts
This is a remix of another t-track rail for a Dewalt table saw, but sized for m6 nuts and bolts instead of m8. I use mine with this great featherboard print: https://www.thingiverse.com/thing:2893293 . My last t-track rail eventually…
P
Printables
Knob (Thumbscrews) for Nuts (M1.6, M2, M2.5, M3, M4, M5, M6, M8) (with and without hole)
These are just pretty basic knobs for many types of nuts. I would suggest you print both the loose and tight version, so you can figure out what fits your needs. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 3 walls * 15%…
P
Printables
Workshop storage / organization boxes (nuts, screws, etc) // Fits with 'toom' ProfiPlus sizes
I need some more boxes to combine with my available bought ones from Toom called “ProfiPlus”. Available sizes: 50mm * 50mm (height: 40mm) 100mm * 50mm (height: 60mm) Printed in same color for screws or nuts or washers. Printed in PETG -…
P
Printables
No Drop Nuts for Micron R1
No Drop Nuts custom fit for the Micron R1 gantry. They make it so the gantry doesn't fall apart when you move it.
P
Printables
Skådis / Skadis - Bosch Screwdriver T Nuts Version
T Nuts version of the Skådis / Skadis - Bosch Screwdriver model.
P
Printables
Modified 3.5 to 5.25 hard drive tray. Requires M3 Nuts and M3 bolts
The M3 nuts have to be placed inside the slot where they will attack to the hard drive cage with the pointy side of the nut pointing up, not the flat top pointing up. You just take a hammer or something heavy and gently hit it until it…
