Bolts, Nuts, Washers. Huge Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base of bolts, nuts and washers from M2 to M48. See description
- Ocena
- 4,286 / 5
- Polubienia
- 1959
- Pobrania
- 8632
- Wydruki
- 18
- Wyświetlenia
- 20 031
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Base
The base includes bolts, nuts and washers of M2 - M48.
Separately models are placed in specific folders.
All data collected in All_in_one.dwg file (autocad).
!Attention!
Be careful when using for accuracy critical parts (or use Horizontal Expansion/ XY Size Compensation: for nuts practical number is from [-0.2mm] to [-0.4mm]) - it may differ from your expectations. Be attentive with sharp corners and bevel on thread - it may not be corresponded with regulatory standard.
Sizes and tolerance for M8 bolt and nut as example are presented below.
Bolts
Bolts are separeted by thread size and lenght (from 3 to 300 mm):
- M2 - 3-16 mm
- M3 - 4-30 mm
- M4 - 6-60 mm
- M5 - 6-80 mm
- M6 - 8-90 mm
- M8 - 8-100 mm
- M10 - 10-200 mm
- M12 - 14-260 mm
- M14 - 16-280 mm
- M16 - 20-300 mm
- M18 - 20-300 mm
- M20 - 25-300 mm
- M22 - 30-300 mm
- M24 - 35-300 mm
- M27 - 35-300 mm
- M30 - 40-300 mm
- M36 - 50-300 mm
- M39 - 55-300 mm
- M42 - 55-300 mm
- M45 - 60-300 mm
- M48 - 65-300 mm
Nuts
Nuts presented by standard and low profiles of M2 - M48.
Washers
Washers presented by standard, narrow and wide profiles of M2 - M48.
Note: Be ready to use Horizontal Expansion / XY Size Compensation (for nuts practical number is from [-0.2mm] to [-0.4mm]) setting for precise docking, especially for Nuts.