Direct screw in T-Nuts for Ikea Skadis Pegboards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct screw in T-Nuts for Ikea Skadis Pegboards.
- Ocena
- 4,833 / 5
- Polubienia
- 122
- Pobrania
- 1009
- Wydruki
- 8
- Wyświetlenia
- 6552
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
General:
Please take a look at model/228663 for a detailed explanation of what this is and what’s it for. This versions are probably not as tough as the versions with hex-nuts, but usable.
Preparation:
As my printer produces slightly undersized holes, I do drill out the hole to the correct core-hole-diameter and then tap the thread. It is easier to do this from the underside, so the drill and tap allready are guided before reaching the thin-walled part, especially on the M4 variant.

FreeCAD source:
The FreeCAD-file contains the M4-Variant, but the M3 variant (or any other) can be created by changing the Hole-Feature. The Parameter-object allows to change baseheight, with and length of the T-Nut (within reasonable values).