1 / 9
M12x1.75 Bolts and Nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 492
- Wydruki
- 1
- Wyświetlenia
- 1179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
I finally learned how to make proper knurling.
I plan to make multiple sizes just because I enjoy making them.
This actually make great and silent fidgets. :)
- After a test print, I decided to take the knurling all the way to a point.
- Version 2 has a larger chamfer and coarser knurling.
- Version 3 has the proper size hex socket... it should NOT match the shaft size :)
- Version 4 has better fit on the hex socket (slight taper)
- Added washer
- Added sets
- Clearer file names
Feel free to send me a message if you have any special requests.
Print Settings
Printer:
Micromake D1
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
10 to 100 Percent
Notes:
- I recommend at least 3 shells/outlines Nuts are pretty strong at 10% Botls, especially longs ones need higher infill Having a cheap tap and die set can help you make these work better.
Category: Parts