Recurve Bow Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collapsible recurve bow stand designed to be light weight and compact.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 1396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Collapsible recurve bow stand designed to be light weight and compact. I used whatever parts I had laying around for the construction. If you would like to use different size hardware all the parameters are easy to modify in the OnShape document below.
I used PLA, and while it's functionally, it does deform slightly under the weight of the bow. I want to try printing out of PA-CF or PET-CF.
I would like to replace the lynchpin with an automatically locking spring based design but it's proving to be difficult.
Print out of PLA with 6 perimeters and 20% infill. I recommend CA glue to hold the hinge pins in place and the bottom aligned.
Hardware
- 16mm OD 14mm ID 330mm long carbon fiber pipe
- 5mm thick foam for the cradle
- 9x 2.4mm diameter nail
- 3mm diameter nail for the lynchpin
- 3x pieces of rubber for the feet
For your convenience a link to the parametric OnShape document is included below.