Recurve Bow Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collapsible recurve bow stand designed to be light weight and compact.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 104
- Makes
- 1
- Views
- 1,396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Collapsible recurve bow stand designed to be light weight and compact. I used whatever parts I had laying around for the construction. If you would like to use different size hardware all the parameters are easy to modify in the OnShape document below.
I used PLA, and while it's functionally, it does deform slightly under the weight of the bow. I want to try printing out of PA-CF or PET-CF.
I would like to replace the lynchpin with an automatically locking spring based design but it's proving to be difficult.
Print out of PLA with 6 perimeters and 20% infill. I recommend CA glue to hold the hinge pins in place and the bottom aligned.
Hardware
- 16mm OD 14mm ID 330mm long carbon fiber pipe
- 5mm thick foam for the cradle
- 9x 2.4mm diameter nail
- 3mm diameter nail for the lynchpin
- 3x pieces of rubber for the feet
For your convenience a link to the parametric OnShape document is included below.