Urbanears Plattan ADV hinge replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I broke the hinge on my urbanears headset, so i contacted urbanears. They instructed me to snap one ear off and cut…
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 341
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I broke the hinge on my urbanears headset, so i contacted urbanears.
They instructed me to snap one ear off and cut the wire so it could 'never' be repaired.
I got a new headset, but they said something that sounded like a challenge. So i hurried to my
Cad program and designed a replacement for the hinge piece. So here it is !. All you have to do now is print it and get a new wire !
It should work with the little metal part that fit into the original.
Regards, Joey
Print Settings
Printer:
k8200
Rafts:
No
Yes
Resolution:
0.2-0.3
40%-100%
How I Designed This
1.1 - Raw scetch
1.2 - Remade the sliding track + extended the top so it would print better and be stronger.
1.3. - Shortened the length of the part
Instructions
- Contact urbanears and follow their instructions to get a new headset. They will ask you to cut the wire and snap one ear of. Cut it in the middle under the headband, for easy fixing.
- Print the part.
- assemble it.
- Use a lighter too burn off the coating on the wires. Watch out ! this burns fast so blow it out quickly.
- Solder it back tougether, I would suggest using non solder metal connections, because it's hard to solder these wires. Don't forget to insulate it. I filmed an guide while doing this, i just have to get around editing it.
Category: Audio