Urbanears Plattan ADV hinge replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I broke the hinge on my urbanears headset, so i contacted urbanears. They instructed me to snap one ear off and cut…
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 31
- Makes
- 1
- Views
- 341
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I broke the hinge on my urbanears headset, so i contacted urbanears.
They instructed me to snap one ear off and cut the wire so it could 'never' be repaired.
I got a new headset, but they said something that sounded like a challenge. So i hurried to my
Cad program and designed a replacement for the hinge piece. So here it is !. All you have to do now is print it and get a new wire !
It should work with the little metal part that fit into the original.
Regards, Joey
Print Settings
Printer:
k8200
Rafts:
No
Yes
Resolution:
0.2-0.3
40%-100%
How I Designed This
1.1 - Raw scetch
1.2 - Remade the sliding track + extended the top so it would print better and be stronger.
1.3. - Shortened the length of the part
Instructions
- Contact urbanears and follow their instructions to get a new headset. They will ask you to cut the wire and snap one ear of. Cut it in the middle under the headband, for easy fixing.
- Print the part.
- assemble it.
- Use a lighter too burn off the coating on the wires. Watch out ! this burns fast so blow it out quickly.
- Solder it back tougether, I would suggest using non solder metal connections, because it's hard to solder these wires. Don't forget to insulate it. I filmed an guide while doing this, i just have to get around editing it.
Category: Audio