Ultrahuman Ring AIR Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a cover/ case for the Ultrahuman Ring AIR to charge it while travelling when chucked into a bag.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 258
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I need to bring the Ultrahuman Ring AIR charger for longer trips/ vacations. I also like the idea of hooking up to a power bank and chucking the ring (and charger) into the bag when I forget to charge it.
Designed a cover for the Ultrahuman Ring AIR charger to keep the ring.
When charging on the desk, the cover can be flipped over and slipped onto the charger base.
If you want to charge your ring on the go, pop in the ring and hook it up to a power bank. The cover will prevent your ring from dislodging. A little peep hole on the cover let you know the charge status of the ring.
When not wearing the ring for prolong period, you can also chuck the ring onto the charging base with this cover so you don't misplace it.
Print Settings
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Walls: 3
- Infill density: 30%
- Brim/ Support: None
I used ABS+ for this print. Any material would work fine.