1 / 4
Minimalist Hex Shelving System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Needed a way to present some prints on the wall and came up with this
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
So this was my first solution to present prints with prints.
I just printed the hexes with variable depths, arranged them in the desired pattern, counted the needed locks and attached to the wall, and when I had the holes marked and drilled I used glue in between the hexes as I knew that I ain't changing it anymore.
You can print these with the blinds already attached in the slicer but later on it makes it hard to change the pattern if you want to.